Figures
Abstract
Microsatellites are the markers of choice for a variety of population genetic studies. The recent advent of next-generation pyrosequencing has drastically accelerated microsatellite locus discovery by providing a greater amount of DNA sequencing reads at lower costs compared to other techniques. However, laboratory testing of PCR primers targeting potential microsatellite markers remains time consuming and costly. Here we show how to reduce this workload by screening microsatellite loci via bioinformatic analyses prior to primer design. Our method emphasizes the importance of sequence quality, and we avoid loci associated with repetitive elements by screening with repetitive sequence databases available for a growing number of taxa. Testing with the Yellowstripe Goatfish Mulloidichthys flavolineatus and the marine planktonic copepod Pleuromamma xiphias we show higher success rate of primers selected by our pipeline in comparison to previous in silico microsatellite detection methodologies. Following the same pipeline, we discover and select microsatellite loci in nine additional species including fishes, sea stars, copepods and octopuses.
Citation: Fernandez-Silva I, Whitney J, Wainwright B, Andrews KR, Ylitalo-Ward H, Bowen BW, et al. (2013) Microsatellites for Next-Generation Ecologists: A Post-Sequencing Bioinformatics Pipeline. PLoS ONE 8(2): e55990. https://doi.org/10.1371/journal.pone.0055990
Editor: Nicole M. Gerardo, Emory University, United States of America
Received: August 26, 2012; Accepted: January 4, 2013; Published: February 12, 2013
Copyright: © 2013 Fernandez-Silva et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This research was supported by the National Oceanic and Atmospheric Administration (NOAA) National Centers for Coastal Ocean Science Coral Reef Ecosystem Studies grant NA07NOS4780187 to the Bishop Museum, NA07NOS478190 to the University of Hawaii, NA07NOS4780189 to the State of Hawaii; the NOAA Coral Reef Conservation Program research grants program administered by Hawaii Undersea Research Laboratory under award NA05OAR4301108, project numbers HC07-11 and HC08-06; NOAA Pacific Island Fisheries Science Center grant NA10NMF4520121 to B.W.B.; NOAA National Marine Sanctuaries Program (http://sanctuaries.noaa.gov/) MOA grant 2005-008/66882 to R.J.T.; the University of Hawai‘i College of Arts & Sciences, Society for Integrative & Comparative Biology Grant-in-Aid of Research, and the American Society for Ichthyologists & Herpetologists to JLW; the National Science Foundation (NSF) under award OCE-1029478 to E. G. and K.R.A; and a Fulbright – Spanish Ministry of Science and Technology fellowship to I.F.S. This work was further supported by the University of Hawaii NSF EPSCoR program (Investing in Multidisciplinary University Activities, EPS-0903833, J. Gaines, PI) in support of the core functional genomics facility at the Hawaii Institute of Marine Biology, SOEST, UH-Manoa. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Microsatellite loci remain one of the most popular choices for population genetic studies. This success may be credited to several attributes including their ability to provide contemporary estimates of migration, distinguish relatively high rates of migration from panmixia, and resolving pedigrees [1]–[5]. In spite of their potential to address a myriad of issues in molecular ecology, evolution, and conservation, until recently the expertise, time and costs of initially developing microsatellite markers remained deterrents for many. This was particularly true for taxa where microsatellites tend to be relatively rare, such as in some insects, birds, bats and corals [6], [7]. Unfortunately, success rate of microsatellite marker development typically correlates with their frequency in the genome [8].
The technology of microsatellite development has recently undergone a revolution with massively parallel sequencing technologies (also known as next-generation sequencing or NGS) allowing large numbers of DNA sequences to be mined for microsatellite repeats. This approach has been successfully implemented to discover microsatellite loci in a growing number of species, including several previously recalcitrant taxa [9], [10], and even extinct taxa [11]. The longer read lengths of the 454 pyrosequencing platform (Roche 454 Life Science, Bradford CT, USA) have made it the preferred approach for microsatellites to date (but see [12]), and the continued rapid advances of NGS technology will make microsatellites even cheaper and easier to develop in the future.
The approaches of NGS microsatellite projects published to date have consisted of generating large amounts of sequencing data from microsatellite enriched libraries or genomic DNA [13], [14], which are then mined for microsatellite loci (typically thousands). Primers are designed from the region flanking the microsatellite and then are tested to identify markers with consistent PCR amplification of unique polymorphic loci [13]. Although this approach has greatly streamlined the microsatellite isolation process in comparison to previous lab methodologies that required cloning [15], [16], ample room remains for reducing the laboratory time and costs associated with post-sequencing marker development.
Can we increase the primer-to-marker conversion rate through selection of microsatellite loci via bioinformatics analysis? Focusing on three reef fishes, two sea stars, two copepods and two octopuses as case studies, we explore bioinformatic analyses to reduce the likelihood of the two most common pitfalls researchers encounter in the development of microsatellite markers: failed PCR amplification and unspecific amplification of multiple loci. Our study builds upon previous work [17], [18] to provide a pipeline to select microsatellite loci via post-sequencing bioinformatics analyses that emphasizes the importance of sequence quality, and avoids loci associated with repetitive elements. To evaluate our post-sequencing microsatellite selection (PSMS) bioinformatics pipeline, we compare the efficiency of our method to previous in silico microsatellite detection methodologies [17] demonstrating that we can streamline the development of microsatellite markers from next-generation sequencing.
Materials and Methods
Ethics Statement
Sample collection methods were approved by the Institutional Animal Care and Use Committee of the University of Hawai‘i (IACUC permit # 09-753-3 to B.W.B. and 10-816-3 to S.A.K).
Preparation of Microsatellite Libraries
To obtain microsatellite markers by 454 pyrosequencing we followed two preparation methods: shotgun and microsatellite enrichment. In the shotgun method, genomic DNA was extracted from a fish fin clip (Mulloidichthys vanicolensis and M. flavolineatus), octopus muscle tissue (Octopus cyanea and O. oliveri) or whole copepods (Haloptilus longicornis and Pleuromamma xiphias) by one of two methods: (1) Qiagen DNeasy kits or (2) incubation with proteinase K at 56°C for 1 h followed by two extractions with phenol:chloroform:isoamyl alcohol (25∶24∶1), one extraction with chloroform:isoamyl alcohol (24∶1) and one ethanol precipitation. Using 500 ng of genomic DNA resuspended in water, we prepared the libraries and ligated different Multiplex Identifier (MID) adaptors to each library using the Rapid Library Preparation Kit following the manufacturer’s manual (454 Life Sciences). In the microsatellite enrichment method, genomic DNA was extracted from fish fin clips (Paracirrhites arcatus) or sea star tube feet (Protoreaster nodosus and Acanthaster planci) following method (2) described above. Microsatellite enriched libraries were made following [15], using Rsa I as the restriction enzyme. Four mixes of biotinylated oligonucleotides were used with mixture specific melting temperatures (Tm) to enrich for microsatellites [Mix 1 (Tm = 50°C): (AAGC)5, (AACC)5, (AACG)5, (ATCC)5, (AAGG)5; Mix 2 (Tm = 45°C): (ATC)8, (AAT)10, (AAC)8, G(AGG)6, (AAG)8, (ACG)6, G(CCG)5, (ACT)8, (ACC)6, (AGC)6; Mix 3 (Tm = 58°C): (TG)10, (TC)10; and Mix 4 (Tm = 65°C): (AC)12, AG12]). Equimolar concentrations of microsatellite-enriched DNA obtained from each mix were pooled and purified using a QIAquick PCR cleanup kit (Qiagen, Valencia, CA, USA). Cleaned and enriched fragments were ligated with 454 sequencing primers and tagged with unique MID adaptors.
Sequencing
Individually tagged library preparations were pooled in two mixes (see Table 1 for pooling summary) and each run on one fourth of a PicoTiterPlate and sequenced with titanium chemistry on a Roche GS-FLX sequencer (454 Life Sciences) at the Center for Advanced Studies in Genomics, Proteomics and Bioinformatics (University of Hawai‘i at Mānoa).
Library Splitting and Adaptor and Primer Removal
We used the program Sff_extract (http://bioinf.comav.upv.es/sff_extract/) to extract the reads from the 454 SFF files and convert them into FASTQ files. We then split the individually tagged libraries and removed the 454 adaptors, MID tags and linkers using scripts from the Fastx_toolkit (http://hannonlab.cshl.edu/fastx_toolkit/).
Post-sequencing Microsatellite Selection (PSMS)
For each data set, our goal was to increase the primer-to-marker conversion rate (i.e. the proportion of primer pairs that successfully amplify the desired product in PCR reactions). Our strategy is based on targeting sequence fragments with high base-call accuracy to be used as template for designing primers and avoiding targeting microsatellite loci associated with repetitive elements in the genome. In our quality control (QC) step, we used the software Clean_reads 0.2.1 (http://bioinf.comav.upv.es/clean_reads/index.html) to trim poor quality regions of the sequences following three steps. First, we removed low-quality bases from the ends of the sequence, second, we found regions of the sequence where the probability of error is highest. If regions with high error were found, the third step was to trim each of these sequences to the largest region having an average probability of error no greater than the maximum average error allowed (cut-off values listed below). The largest region meeting all of the criteria was chosen as the final clean read.
We applied two combinations of QC parameters in Clean_reads: i) a high stringency and ii) a low stringency. For (i) we removed any regions at either end or within a sequence read that within a 10 bp window had an average probability of error greater than 0.003, and trimmed each sequence read to the largest region having an average probability of error no greater than 0.003 (Clean_reads parameters: lucy_bracket = 10.0, 0.003; lucy_window = 10.0, 0.003; lucy_error = 0.003, 0.02). For (ii) we removed any regions at either end or within a sequence read that within a 10 bp window had an average probability of error greater than 0.02, and trimmed each sequence read to the largest region having an average probability of error no greater than 0.02 (Clean_reads default values: lucy_bracket = 10.0, 0.02; lucy_window = 50.0, 0.08; lucy_error = 0.025, 0.02).
Next, we performed a similarity analyses on the clean datasets to eliminate redundant sequences. Highly similar sequences were used to build contigs and reconstruct consensus sequences, with the help of the pipe1.pl and pipe2.pl scripts implemented in QDD2.1_beta (http://gsite.univ-provence.fr/gsite/Local/egee/dir/meglecz/QDD.html). Briefly, microsatellite containing sequences with perfect repeats of di- to hexanucleotides were selected, sequence similarity was detected by an all-against-all BLAST (BLAST-2.2.25+ ftp://ftp.ncbi.nih.gov/blast/executables/) and pairwise identity was calculated along the whole microsatellite flanking regions. According to this analysis the sequences were sorted as follows: sequences with >95% identity were grouped into contigs and consensus sequences were constructed with ClustalW-2.1.1 [19] (ftp://ftp.ebi.ac.uk/pub/software/clustalw2), where a minimum of 66% of the sequences had to have the same base at a site to accept it as a consensus. Sequences that fell under the 95% similarity threshold were eliminated from the pipeline, because of the increased risk of amplifying multiple loci or unspecific products. Sequences that had only hits to themselves were classified as singletons. Finally, we prepared a file containing all the singletons and a file with all the contigs.
We then identified sequences that showed similarity to known repetitive elements. To check for repetitive elements (RE), we compared both our singletons and contigs files against the RE database Repbase (Repbase v16.09; http://www.girinst.org/repbase/index.html). For the fishes we searched against repetitive elements in vertebrate genomes including transposable elements, pseudogenes, and integrated viruses (Repbase libraries were fugapp.ref, fugrep.ref, humrep.ref, humsub.ref, mamrep.ref, mamsub.ref, mousub.ref, prirep.ref, prisub.ref, pseudo.ref, ratsub.ref, rodrep.ref, rodsub.ref, synrep.ref, tmpxen.ref, vrtrep.ref, zebapp.ref, and zebrep.ref). For the sea stars, copepods and octopuses we searched against repetitive elements discovered in any animal genomes (same Repbase libraries as above plus the invertebrate libraries angrep.ref, drorep.ref, invrep.ref, cbrrep.ref, invsub.ref, celrep.ref, cinrep.ref, and cinunc.ref). Scanning was performed with Censor v4.2.27 [20] (http://www.girinst.org/downloads/software/censor/) using default sensitivity parameters. Sequences with >65% homology to known repetitive elements were excluded from further analysis. With the help of the script pipe3.pl of QDD2.1_beta we detected perfect repeats with a minimum length of five di- to hexanucleotide repeats. Using PRIMER3 v1.1.4 [21] (http://primer3.sourceforge.net/), primers were designed with microsatellite repeats as target regions to produce PCR products from 90 to 300 bp, and the minimum, optimum, and maximum oligonucleotide sizes set as 18, 20, and 27; minimum, optimum, and maximum Tm set at 57.0°C, 60.0°C, and 63.0°C; maximum difference in Tm for the primers of 1.0°C; minimum, optimum, and maximum GC content set at 20%, 50%, and 80%; and no GC clamp. Since 454 sequencing has high error rate at homopolymer sites, we set the maximum poly-X length to 4. All other parameters were set to the default values.
To evaluate the ability of our pipeline to increase primer-to-marker conversion rate, we synthesized 24 primer pairs for the goatfish Mulloidichthys flavolineatus and 15 primer pairs for the copepod Pleuromamma xiphias selected by our PSMS pipeline, and 20 and 15 primer pairs, respectively, from the QDD2.1_beta output. (The QDD pipeline includes neither the QC step nor the filter to eliminate sequences similar to repetitive elements deposited in Repbase). The PCR reactions were conducted using the M13-tailed primer method modified from [22] and described in [23], [24]. We optimized the PCR conditions as described in [25]. PCR amplification products were resolved using an ABI 3130 Genetic Analyzer and sized using GENEMAPPER v4.0 (Applied Biosystems).
Results
Pyrosequencing and Microsatellite Mining
In the first sequencing run, the six libraries generated 310563 DNA sequence reads with an average length of ∼550 bp. After barcode splitting we recovered 33962 and 28135 sequences for the goatfishes M. vanicolensis and M. flavolineatus (shotgun libraries), 25945 and 36551 for the libraries of arc-eye hawkfish P. arcatus (enriched libraries) and 85404 and 83825 for the sea stars A. planci and P. nodosus (enriched libraries; Table 1). Only 2.2% of the sequence reads remained unassigned, which was the result of sequencing errors in the barcodes themselves.
In the second sequencing run, the four libraries generated 263337 DNA sequence reads with an average length ∼550 bp. After barcode splitting we recovered 64916 and 75702 sequences for the copepods H. longicornis and P. xiphias (shotgun libraries) and 56233 and 59445 sequence reads for the octopus O. cyanea and O. oliveri (shotgun libraries). Only 2.7% of the reads remained unassigned. We mined the datasets for microsatellite repeats and in all cases we identified ∼6000, or more, loci in each of shotgun datasets and from ∼17000 to ∼23000 from enriched libraries (Table 1).
Post-sequencing Selection of Microsatellite Loci Via Bioinformatics Analyses and Comparison to Previous Methodologies
Focusing on the reef fish M. flavolineatus as a case study, we generated a set of microsatellite primers for laboratory testing using previous in silico microsatellite detection methodologies ([17] implemented in QDD2.1_beta) versus our PSMS bioinformatic pipeline (Figure 1). Using QDD2.1_beta we searched 28135 M. flavolineatus DNA sequences and identified 6209 microsatellite loci with flanking sequences that allowed designing primer pairs with 90–300 bp target amplification products. In spite of thorough PCR optimization efforts, only two out of the 20 primer pairs that we designed and tested consistently yielded amplification products of the expected size.
For the PSMS pipeline we analyzed the 11960 highest-quality reads from M. flavolineatus (Table 2, Figure S1) and identified 1173 reads that had di- to hexanucleotide repeats. Of these, 937 reads had hits to only themselves (singletons) and were used in the remainder of the pipeline (see below). Additionally, 126 sequences were highly similar (>95% identity) to at least one other read and were grouped into 43 contigs. We also searched 27287 DNA sequence reads selected with less stringent QC filters and identified 5489 with microsatellite repeats, of which 752 were pooled into 256 contigs and were used in the remainder of the pipeline. Additionally, we identified 4291 sequences as singletons.
For the rest of the pipeline we focused on the contig sequences (less stringent QC) and the singleton sequences (high stringency QC). For the contigs, we excluded 12% with similarity to vertebrate repetitive elements, leaving 225 contigs, 176 of which had flanking sequences that met the criteria for primer design (Table 2). For the singletons, we excluded 26.2% with similarity to repetitive elements, leaving 701 sequences, of which 286 were appropriate for microsatellite-flanking primer design. We synthesized 24 microsatellite primer pairs and tested them for reliable amplification. Twenty-three primer pairs selected by the PSMS pipeline showed consistent amplification of a unique product of the expected size, resulting in a 96% primer-to-marker conversion rate, compared to 10% with previous screening technology. We followed the same pipeline to discover and select 387 candidate microsatellite markers in the copepod Pleuromamma xiphias (Table 3). We synthesized and tested 15 of these primer pairs and in eight cases obtained a unique PCR amplification product of expected size, resulting in a 53% primer-to-marker conversion rate. These results contrast with the amplification success obtained when testing an equal number of primers synthesized directly from the QDD2.1_beta output, where only four primer pairs yielded PCR amplification but none of them produced consistently scorable products. These markers are currently being tested in copepod and goatfish samples from locations representative of their distribution range, for which separate reports are being prepared.
Post-sequencing Selection of Microsatellite Loci via Bioinformatic Analyses in Fishes and Sea Stars
Following the same pipeline we identified microsatellite markers in nine additional libraries from eight additional species. We applied two strategies to select microsatellite loci. The first consisted of performing a low stringency QC and only designing primers from the contigs that had no similarity to repetitive elements. The second strategy was to use a very stringent QC (i.e. to select sequence regions with high base-call accuracy) and only designing primers in the singleton sequences that had no similarity to repetitive elements. The results are summarized in Tables 2 and 3. For the goatfish M. vanicolensis we identified 380 putative microsatellite loci. Similarly, we identified 875 and 850 candidate microsatellite markers from two hawkfish P. arcatus libraries (brown and pink morphotypes, respectively). For the sea star, P. nodosus, we identified 466 microsatellite loci and for the other sea star, A. planci, we identified 276 loci. Similarly, we identified 243 candidate microsatellite markers in the copepod H. longicornis, and 811 and 1025 candidate loci from the octopuses O. cyanea and O. oliveri, respectively.
Discussion
Shallow genome pyrosequencing with as little as 1/32 of a PicoTiterPlate can deliver sufficient microsatellite loci for most ecological studies of non-model taxa. In the raw datasets, microsatellite-containing reads numbered in the thousands regardless of whether or not we enriched for microsatellites. Enrichment, however, did tend to produce a higher percentage of sequences with microsatellites (e.g., Paracirrhites arcatus, Tables 2 and 3). Here we show that applying simple bioinformatic selection tools prior to primer design will reduce laboratory time and costs relative to randomly testing subsets of potential primers.
The 454 technology is known to be highly variable in terms of the quality of the reads [26], [27]. Since the accuracy of base calling in the microsatellite flanking region impacts PCR amplification success, sequence quality is of primary importance. To the best of our knowledge, however, quality control such as we outline here has not been applied to previous 454 microsatellite studies. As with the most successful previous approaches prior to the advent of pyrosequencing (e.g. [15], [16], [28], [29]), projects using 454 sequencing should employ a rigorous initial quality control step. However, an obvious tradeoff exists because the chances of successful PCR amplification are increased with higher thresholds of sequence accuracy, but a very stringent quality control will drastically reduce the number of candidate microsatellite loci to test. Compared to methods based on mean sequence quality, the sliding window approach that we used (implemented in Clean_reads) results in a larger number of sequences in the clean dataset, because the 3′end of the sequences typically have the lowest quality, which reduces the overall mean quality score in otherwise robust sequences. An additional way to increase sequence accuracy is to design primers in the consensus sequences of the contigs where multiple sequence reads of the same locus can be used to compensate for base calling errors. Here, we designed primers from only the most accurate singletons and then relaxed the stringency of the QC to design primers from high-quality, consensus sequences of the contigs. Researchers might want to design primers in both of these pools or focus on just one. For instance, contigs may be the primary source of putative loci in enrichment preparation methods, whereas in shotgun projects, where a larger number of loci are sequenced at a lesser depth, a higher number of singletons is expected. Additionally, most errors on the 454 platform are associated with homopolymer-length calling [30]. Limiting the maximum homopolymer length allowed in the priming sites is a useful control to mitigate this issue. Our laboratory tests confirmed very high primer-to-marker conversion rates, which we attribute to the increase in template sequence accuracy.
A second, and less recognized, impediment to finding successful microsatellites primers is multicopy DNA regions such as transposable elements (transposons). These small repetitive DNA segments can insert themselves into new locations, and can account for a large portion of a genome. For example, transposable elements comprise up to 80% of some grass genomes and 66% of the human genomes, these values being most likely underestimations [31]–[33]. In fish, these elements have only been studied in a few model organisms for which genomic information is available, however all known families of transposons have been identified in this group and they seem to play an important role in genome evolution [34].
Genomic studies indicate that microsatellites are often found in close association with transposable elements [32], [35]–[37] which can lead to amplification of multicopy products rather than a single locus [8]. Repetitive elements have been studied in a variety of organisms and their sequences are available in public databases (e.g. Repbase) facilitating their identification in genomic sequencing datasets. Microsatellite projects on vertebrates, arthropods and many plant taxa can benefit from comparisons to the genomic information available from related genomes. To reduce the chances of targeting microsatellite loci associated with repetitive elements, we compared our sequences to databases of repetitive elements, which allowed us to remove sequences with REs, including retrotransposons and pseudogenes. The RE filter can be applied before or after microsatellite detection. Because taxonomic coverage of RE databases is limited, false negative discovery rates are likely to be high in most comparisons, as it is unlikely that all repetitive elements present in the genome of a focal taxon are represented in the RE databases. To apply a filter that does not depend on the availability of genomic resources, we also eliminated sequences that were partially homologous to other sequences in our datasets (i.e. sequences with BLAST hits for similarity with 80–95% identity). Alternative de novo detection methods of repetitive elements could be incorporated in the pipeline (e.g. P-clouds [33], [38]).
Logically, the probability of detecting a given locus is a function of its copy number in the genome, so highly repetitive elements have a disproportionate probability of being selected in random screening. That none of the primer pairs selected with our PSMS pipeline amplified multiple targets in the PCR tests (in contrast with the ones developed with previous methodologies) is an indication of the value of our approach.
We argue that researchers developing microsatellites markers from any massively parallel sequencing technology should take advantage of available bioinformatic tools and genomic resources to explore their sequence datasets. A small initial investment of computer time can provide extensive savings in terms of laboratory costs and time spent optimizing poorly performing primers and scoring markers that amplify repetitive regions.
Supporting Information
Figure S1.
Box plots depicting the sequence quality along the reads of M.vanicolensis: a) before quality control, b) after quality control with low stringency parameters (see methods), c) after quality control with high stringency parameters. The x-axis is the length of the sequencing reads expressed in bp and on the y-axis is the sequence quality as represented by Phred scores. In the boxplots, the black lines indicate median values, the dark red boxes below and above the black lines indicate the lower and upper quartiles respectively, and the light red boxes (a) and ends of the whiskers (b, c) represent the minimum and maximum quality scores at each position.
https://doi.org/10.1371/journal.pone.0055990.s001
(TIF)
Acknowledgments
The authors thank Brent Snelgrove for his assistance testing primers and the members of the ToBo lab for their support. We also thank Shaobin Hou and Aaron G. Young from the Center for Advanced Studies in Genomics, Proteomics and Bioinformatics at the University of Hawai‘i for his assistance with implementing this 454 sequencing project and Amy Eggers from HIMB EPSCoR core facility for assistance with genotyping. Thanks to director Jo-Ann Leong and the staff at the Hawai‘i Institute of Marine Biology for their support throughout this project. Editor Nicole M. Gerardo and two anonymous reviewers made comments that substantially improved the manuscript. This is publication no. 1537 from the Hawai‘i Institute of Marine Biology and publication no. 8825 from the University of Hawai‘i School of Oceanography, Earth Sciences, and Technology.
Author Contributions
Conceived and designed the experiments: IFS JW BW SAK BWB RJT EG. Performed the experiments: IFS JW KRA HYW. Analyzed the data: IFS. Wrote the paper: IFS RJT SAK BWB.
References
- 1. Jarne P, Lagoda PJL (1996) Microsatellites, from molecules to populations and back. Trends Ecol Evol 11: 424–429.
- 2. Li YC, Korol AB, Fahima T, Beiles A, Nevo E (2002) Microsatellites: Genomic distribution, putative functions, and mutational mechanisms: a review. Mol Ecol 11: 2453–2465.
- 3. Zhang DX, Hewitt GM (2003) Nuclear DNA analyses in genetic studies of populations: practice, problems and prospects. Mol Ecol 12: 563–584.
- 4. Ellegren H (2004) Microsatellites: simple sequences with complex evolution. Nat Rev Genet 5: 435–445.
- 5. Selkoe KA, Toonen RJ (2006) Microsatellites for ecologists: A practical guide to using and evaluating microsatellite markers. Ecol Letters 9: 615–629.
- 6. Neff BD, Gross MR (2001) Microsatellite evolution in vertebrates: Inference from AC dinucleotide repeats. Evolution 55: 1717–1733.
- 7. Baums IB, Hughes CR, Hellberg ME (2005) Mendelian microsatellite loci for the Caribbean coral Acropora palmata. Mar Ecol Prog Ser 288: 115–127.
- 8. Zhang D-X (2004) Lepidopteran microsatellite DNA: redundant but promising. Trends Ecol Evol 19: 507–509 .
- 9. Smith S, Joss T, Stow A (2009) Successful development of microsatellite markers in a challenging species: the horizontal borer Austroplatypus incompertus (Coleoptera: Curculionidae). Bull Entom Res 101: 551–555.
- 10. Sinama M, Dubut V, Costedoat C, Gilles A, Junker M, et al. (2011) Challenges of microsatellite development in Lepidoptera: Euphydryas aurinia (Nymphalidae) as a case study. Eur J Entomol 108: 261–266.
- 11.
Allentoft ME, Schuster SC, Holdaway RN, Hale ML, McLay, etal. (2009) Identification of microsatellites from an extinct moa species using high throughput (454) sequence data. BioTechniques, 46, 195–200.
- 12. Castoe TA, Poole AW, de Koning APJ, Jones KL, Tomback DF, et al. (2012) Rapid microsatellite identification from Illumina paired-end genomic sequencing in two birds and a snake. PLoS ONE 7): e30953 .
- 13. Guichoux E, Lagache L, Wagner S, Chaumeil P, Léger P, et al. (2011) Current trends in microsatellite genotyping. Mol Ecol Resour 11: 591–611.
- 14. Malausa T, Gilles A, Meglecz E, Blanquart H, Duthoy S, et al. (2011) High-throughput microsatellite isolation through 454 GS-FLX Titanium pyrosequencing of enriched DNA libraries. Mol Ecol Resour 11: 638–644.
- 15.
Toonen, Robert J (1997) Microsatellites for Ecologists: Non-Radioactive Isolation and Amplification Protocols for microsatellite markers, Unpublished manuscript, available from the author or via anonymous FTP: Available: http:/biogeek.ucdavis.edu/Msats/. or Available: http://www2.hawaii.edu/~toonen/files/MsatsV1.pdf.
- 16.
Glenn TC, Schable NA (2005) Isolating microsatellite DNA loci. In: Zimmer EA, Roalson E, editors. Molecular Evolution: Producing the Biochemical Data, Part B. Academic Press, San Diego, USA, 202–222.
- 17. Megelcz E, Costedoat C, Dubut V, Gilles A, Malausa T, et al. (2010) QDD: A user-friendly program to select microsatellite markers and design primers from large sequencing projects. Bioinformatics 26: 403–404 .
- 18. Gardner MG, Fitch AJ, Bertozzi T, Lowe AJ (2011) Rise of the machines – recommendations for ecologists when using next generation sequencing for microsatellite development. Mol Ecol Res 11 (6): 1093–1101.
- 19. Larkin MA, Blackshields G, Brown NP, Chenna R, McGettigan PA, et al. (2007) Clustal W and Clustal X version 2.0. Bioinformatics 23: 2947–2948.
- 20. Kohany O, Gentles AJ, Hankus L, Jurka J (2006) Annotation, submission and screening of repetitive elements in Repbase: RepbaseSubmitter and Censor. BMC Bioinformatics 7: 474.
- 21. Rozen S, Skaletsky H (2000) Primer3 on the WWW for general users and for biologist programmers. Methods Mol Biol 132: 365–86.
- 22. Boutin-Ganache I, Raposo M, Raymond M, Deschepper CF (2001) M13-tailed primers improve the readability and usability of microsatellite analyses performed with two different allele sizing methods. BioTechniques 31: 24–28.
- 23. Gaither MR, Toonen RJ, Sorenson L, Bowen BW (2010) Isolation and characterization of microsatellite markers for the Crimson Jobfish, Pristipomoides filamentosus (Lutjanidae). Cons Genet Res 2: 169–172.
- 24. Concepcion GT, Polato NR, Baums IB, Toonen RJ (2010) Development of microsatellite markers from four Hawaiian corals: Acropora cytherea, Fungia scutaria, Montipora capitata and Porites lobata. Cons Genet Res 2: 11–15.
- 25. Fernandez-Silva I, Eduardo I, Blanca J, Esteras C, Pico B, et al. (2008) Bin mapping of genomic and EST-derived SSRs in melon (Cucumis melo L.). Theor Appl Genet 118: 139–150 .
- 26. Harismendy O, Ng PC, Strausberg RL, Wang X, Stockwell TB, et al. (2009) Evaluation of next generation sequencing platforms for population targeted sequencing studies. Genome Biology 10: R32.
- 27. Niu B, Fu L, Sun S, Li W (2010) Artificial and natural duplicates in pyrosequencing reads of metagenomic data. BMC Bioinformatics 11: 187.
- 28.
Estoup A, Turgeon J (1996) Microsatellite markers: Isolation with non-radioactive probes and amplification. Version of 12/1996 Laboratoire de Génétique des Poissons, INRA 78352 Jouy-en-Josas FRANCE.
- 29.
Glenn TC (1996) The Microsatellite Manual Version 6, July 27,1996 Laboratory of Molecular Systematics - MRC 534, MSC Smithsonian Institution, Washington DC 20560.
- 30. Gilles A, Meglécz E, Pech N, Ferreira S, Malausa T, et al. (2011) Accuracy and quality assessment of 454 GS-FLX Titanium pyrosequencing. BMC Genomics 12: 245 .
- 31. Feschotte C, Jiang N, Wessler SR (2002) Plant transposable elements: where genetics meets genomics. Nat Rev Genet 3: 329–341.
- 32. McInerney CE, Allcock AL, Johnson MP, Bailie DA, Prodohl PA (2011) Comparative genomic analysis reveals species dependent complexities that explain difficulties with microsatellite marker development in molluscs. Heredity 106: 78–87.
- 33. de Koning APJ, Gu W, Castoe TA, Batzer MA, Pollock DD (2011) Repetitive elements may comprise over two-thirds of the human genome. PLoS Genet 7 (12): e1002384.
- 34. Ferreira DC, Porto-Foresti F, Oliveira C, Foresti F (2011) Transposable elements as a potential source for understanding the fish genome. Mobile Genetic Elements 1: 112–117.
- 35. Ramsay L, Macaulay M, Cardle L, Morgante M, degli Ivanissevich S, et al. (1999) Intimate association of microsatellite repeats with retrotransposons and other dispersed repetitive elements in barley. Plant J 17: 415–425.
- 36. Gaffney PM, Pierce JC, MacKinley AG, Titchen DA, Glenn WK (2003) Pearl, a novel family of putative transposable elements in bivalve molluscs. J Mol Evol 56: 308–316.
- 37. Carreras-Carbonell J, Macpherson E, Pascual M (2006) Population structure within and between species of the Mediterranean triplefin fish Tripterygion delaisi revealed by highly polymorphic microsatellite loci. Mol Ecol 15: 3527–3539.
- 38. Gu W, Castoe TA, Hedges DJ, Batzer MA, Pollock DD (2008) Identification of repeat structure in large genomes using repeat probability clouds. Anal Biochem 380: 77–83.